Tel: 86-571-28876866


Home > Knowledge > Content
A guide to the operation of an electronic thermometer
- Jun 22, 2018 -

1. before using the thermometer, the head of the thermometer should be sterilized with alcohol.

Functional diagram of electronic thermometer

Functional diagram of electronic thermometer

2. press the switch, the buzzer immediately beeps, and the display is shown in Fig. A for about 2 seconds.

3. then the display shows the temperature of the last side as shown in figure B (if last measured at 36.5 C), and the well will last for about 2 seconds.  Then the monitor may display as shown in the C diagram. The "C" symbol flickers, indicating that the thermometer is in the waiting state. (when the temperature is above 32 c at room temperature, the thermometer will display the room temperature without showing that the "C" symbol is constantly flashing) as shown in the D diagram.

4. use a thermometer to measure body temperature. When the body temperature is measured, the temperature gradually rises, while the "temperature" sign keeps blinking.

5. when the temperature rise speed is less than 0 in 16 seconds, at 1, the sign of "centigrade" stops flashing, and the thermometer sends out about 5 seconds of cue. At this time, the thermometer is finished and the body temperature can be read.

The 6. thermometer has the function of automatic shutdown. It will shut down automatically within 10 minutes after the measurement. To extend battery life, it is recommended that users press the power button and turn off the power after the measurement is finished.

Add: Liuxia Town, Xihu District, Hangzhou, Zhejiang province China

Tel: 86-571-28876866

Whatsapp/wechat/mobile: 86-18658896852

Skype: richard19880824