Medical Compressor Nebulizer
1.Working voltage: Power adapter output:DC12V/1A
2.Input power consumption: 20VA
3.The average rate of spray: ≥0.2ml/min
4.Atomized particles: ≤5 μm
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Description
Product Description
Nowadays, with the increasingly serious air pollution and the sudden cold and warm weather during the season transition, the number of patients with respiratory diseases has greatly increased. The traditional mode of taking medicine and injection treatment cannot meet the various complex treatment conditions and the modern people's demand for high quality of life, so the atomization treatment of liquid medicine is of great significance.
Medical Compressor Nebulizer is a type of atomizer. Compressed atomization uses the original medicine for atomization, does not require dilution, has good clinical effects, almost no residual amount of medicine, and high utilization rate of medicine. The atomized particles are also ultra-fine, not easy to collide and combine, and comfortable for human body to inhale.

The compression nebulizers have the following advantages:
1. The Medical Compressor Nebulizer has a built-in high-efficiency oil-free piston compressor. No cooling water is required for atomization, daily maintenance is free, and the operation is simpler and more convenient.
2. The original drug is atomized, no dilution is required, and the clinical effect is good.
3. There is almost no drug residue, and the drug utilization rate is high.
4. It is more convenient to operate and use. The product is equipped with a 1-meter trachea, which has a large room for movement and can be used while sitting or lying. The atomization component is light and easy to wear and hold.
5. The atomization uses the original drug for atomization. The amount of atomization inhaled during the relative treatment time is appropriate, and it is not easy to cause the tracheal inner wall mucosa to swell and cause tracheal obstruction.
6. Purely mechanical products, with extremely low failure rate, low maintenance cost and long service life.
Atomization method
Generally, infants and young children use masks, while adults can use masks or mouthpieces. The Medical Compressor Nebulizer usually comes with a child mask + an adult mask + an adult mouthpiece. If you need an additional mask or mouthpiece, you can buy it separately.
Noise
Generally, the noise decibel of a household desktop compression atomizer is less than or equal to 65dB, and the handheld one is quieter, about less than or equal to 45dB. What is the concept of 65 decibels? It is about the sound of a car engine running, because under normal circumstances, the atomization time is 15-20 minutes, and this decibel is acceptable.


The medical compression nebulizer is mainly composed of a main unit, an air supply pipe, an atomizing device, a nozzle or an inhalation mask, wherein the main unit is mainly composed of a compression pump, a filter assembly and a control system. The medical compression nebulizer uses the principle of the Venturi effect. Generally, it uses the compressed gas generated by a gas compressor as the driving source to generate and transmit aerosol. The schematic diagram of its working principle is shown in the figure below. When the compressed air generated by the compressor is ejected from the nozzle, the negative pressure generated between the nozzle and the suction pipe sucks the liquid medicine upward. The sucked-up liquid medicine hits the diaphragm above and becomes an extremely fine mist that is ejected to the outside.
Nebulizer particles
The hospital nebulizer uses a compressed nebulizer with a nebulizer particle size of 2-5μm, which is suitable for all people (adults/elderly/children) and major respiratory diseases. The nebulizer does not mean the larger the mist, the better. The final effect depends on:
The drug used (follow the doctor's advice);
The size of the nebulizer particles determines the part of the body that is affected.
The frequency of inhalation/exhalation;
The amount of drug waste. When exhaling, part of the mist will be blown out of the cup, which means that the amount of medication is insufficient.

The detailed ranking of the 2024 nebulizer brand rankings are OMRON, Yuwell, PARI, Philips Respironics, YHRT MEDICAL, Scian, YUEHUA, Feellife, CONTEC, and Folee.
Company profile
Hangzhou Health Shining Electronic Technology is a leading company dedicated to the research, development, manufacture, and market of digital thermometers, infrared thermometers, blood pressure monitors, hearing aids and other health care products.
Health Shining covers an area of 5000 square meters with over 100 employees. Our production capacity has reached 500,000pcs of digital thermometers, 50,000 infrared thermometers, 20,000pcs blood pressure monitors per month. Following ISO 13485, we have formed a complete a set of management system from research, production to final testy and qualified shipment. Your trust, our responsibility. we are looking forward to cooperate with you.



FAQ
1. Q: What's the minimum order quantity (MOQ)?
A: For most of our medical products, even an order of just one is warmly welcomed.
2. Q: Can you provide free samples? How long can I get the the samples?
A: Yes.Usually for two or three days.
3. Q: What is the shipping fee of the samples?
A: The shipping fee depends on the weight and package size of the goods and the destination.
4. Q: How do you ship the order?
A: Please inform us your preferred shipping way, by sea, by air or by express. We have professional shipping agents to provide the best shipping service and guarantee.
5. Q: What are your methods of payment ?
A: We accept T/T ,LC,Western Union ,Escrow ,Paypal and more.Please suggest your preferred payment method.
6. Q: How long is the warranty of the product?
A. The product warranty is 1 year, and we accept return and replacement.
7. Q: What does your factory do regarding quality control?
A: 100% QC inspection before shipment. Quality control department is specially responsible for quality checking.
8. Q: Can I put my logo on the product?
A: Yes, we support customized products and packaging. Please contact our salespeople for more details.
Send Inquiry
You Might Also Like














