How To Use Blood Glucose Meter

Feb 08, 2023

Leave a message

How to use blood glucose meter？

Blood Glucose Meter

BG-102

Product Link: https://www.cnhealthshining.com/blood-glucose-meter/glucose-device.html

Step 1：Preparing the lancing device

1)Turn the cap anti-clockwise to remove it. Insert a new sterilized lancet into the lancet holder and push it down firmly until it stops.

2)Twist off the protective disk until it separates from the lancet.

3)Slide the cap on until it stops(Avoid contact with the lancet pin).

4)Adjust puncture depth by turning the depth adjusting knob.The indication marks different leveles of skin penetration. The higher of the number,the deeper of penetration.

5)After slide the ejection spring controller back until it clicks.The lancing device is ready to use.

Step 2：Testing your blood glucose

1)Wash your hands and the puncture site with an alcohol swab or soapy water.Rinse and dry thoroughly.

2)Insert a test strip,contact bar end first and facing up,into strip port,and push it in until stops. The meter will automatically turn on and shortly display symbols on screen.

3)When you see Apply Blood Sample Reminder symbol flashing,hold the lancing device firmly
against the side of your fingertip. Press the Release Button. Gently squeeze your finger to assist the blood flow.

4)Touch the blood drop to the top edge of test strip. Hold until the confirmation window is full.The
meter begins testing with display countdown.

5)At the end of the countdown, The screen will display test result.

6)Remove the used test strip.The meter will store the test result and automatically turn off.

7)Put the protective disk back on the lancet. Discard it properly.